History.
Rev: 1.000g
1."Medium not blank reported".
2."No Image" message added.
3.Image size in displayed in human mega bytes.
4.Confirmation of "Multiple images" option selected.
5.Longer time to diplay drive RID.
7.Glitch in the progres bar eliminated.
8."Waiting for drive ready..." message shortened.
9."FROM HD" message eliminated in COMPARE mode.
10.Frame accurate copy for BP5.
11.Read watermark option added for BP5.
12."Long pressed key" bug fixed.
13.Smart drive features for BP5.
14.Option to back of from SELECT IMAGE screen.

Rev: 1.000m
1.DVD multizone fix.

Rev: 1.000p
1.8X speed set audio verification.
2.Watermark recorded at selected speed(not 4X).

Rev: 1.000s
1.24X speed selection bug fixed.

Rev: 1.000t
1.New firmware for BP5 (mf36)
2.Firmware update bug fixed.
3.Support for XP.
4.Speed selection for DVD.

Rev: 1.000x
1.16X speed selection bug fixed(BP5).
2.Reading ATIP faeture added.

Rev: 1.000w
1."Remaining time" bug fixed.
2.Copy protection implemented for BP5
3.Relay mode improved.

Rev: 1.000x
1.Support for BP-16000P.

Rev: 1.000y
1.Acard adapter fix for BP-16000P.

Rev: 1.000z
1.Increased buffer size.

Rev. 1.001d
1.Increased audio archive speed for BP5.


Rev. 1.001e
1.Async mode support added.

Rev. 1.001f
1.Audio import bug fixed.
2.Async verification bug fixed.
3.Optimized card detection.

Rev. 1.001g
1.Bottom display line cleared when archiving master afer async copying.

Rev. 1.001h
1.Lockup after pressing START whe setting recording speed
2.STOP key enables user to quit settings display without making any changes.
3.Available HD space is checked before archiving(HD capacity error is reported
when attempting to read-in 9GB DVD master.

Rev 1.001i
1.Loop mode added.
2.Removed HD space check.
3.Flush cache error ignored in simulation mode.

Rev: 1.001j
1.Memory size reported under key #1.
2.Image is erased in case of read failure.


Rev: 1.001m
1.fix for 3703 (printing is not supported in this version).

Rev: 1.001p
1."Verify after copy" bug fixed in automation mode.
2.Async mode selection display message about unsufficient memory.
3."Reject check" implemented in automation compare mode .
4.Master ejected after completed audio import.
5.Display is cleared after not selecting reading ATIP.

Rev 1.001v
1.Bug in compare mode fixed("INPUT SPINDLE" situation).

Rev 1.001x
1."ERASY ONLY" function implemented for BP5(both manual and automation).
2."READ ATIP" shows brand.

Rev 1.001y
1.Media.dat file added to the firmware update disc.
1.Prefix 'A' is added to the software rev displayed under key #1.

Rev 1.001z
1.CD-RW and DVD-RW are erased automatically when needed.
BP4 , BP5 and A03(DVD-RW only) are supported. 

Rev 1.002a
1.CD-RW support for A03 added.

Rev 1.002c
1.Reading ATIP added to automation version.
2.Audio extraction added to automation version.
3.LOOP spelling corrected.
4.STOP archive bug fixed.
5.Insufficient spelling corrected.
6.STOP key allows to quit erasing.
7.only 2X speed slection allowe for A03.
8.Firmware rev added to the watermark.

Rev 1.002d
1.Support for BP1700(engineering only).
2.Status update after quitting async mode.(key #9).

Rev 1.002e
1.Loader diagnostics implemented(key #4).
2.Lockup in sync mode eliminated.

Rev 1.002f
1.Spelling of LOOP MODE corrected.

Rev 1.002h
1.CopyPro printer support for 3706P.
2.Fixes for cd-r recording PIONEER A04.

Rev 1.002i
1.When COPY TO HD selected it is possible to reacord at the same time if blanks are found
 in the drives other than the reading one.

Rev 1.002j
1.Support for printer in toer configuration.

Rev 1.002k
1.Improved error handling in A04 (CD-R recording).

Rev 1.002n
1.Improved error handling for disc loading(MT loader).
2.Smart media support.

Rev 1.002r
1.Fix for minor Panasonic DVD-R recorder master.

Rev 1.002s
1.Loop test in loop mode.

Rev 1.002t
1.Increased buffer cache buffer size.

Rev 1.002u
1.Support for BP1700.

Rev 1.002v
1.Watermark feature added for BP1700.

Rev 1.002x
1.Fix for ISRC problem in BP1700P firmware.

Rev 1.002z
*1.Fix for TR loader and CopyPRO printer.

Rev 1.003a
*1.Fix for resetting active spindle.

Rev 1.003b
1.HD capacity bug fixed.
2.BP1700 on FireWire support addded (ACARD adapter not supported for this drive).
3.PRN ile import bug fixed.

Rev 1.003d
1.Print bug fixed.
2.Watermark eliminated because BP1700P firmware mc00 has bug in that area.
3.Shutdown bug fixed.

Rev 1.003h
1.Drive order function for BP1700 drives (not support for PIONEER).
2.RID reported correctly by BP1700P.


Rev 1.003s
1.DVD multiRZone recording bug fixed.
2.PRinter alignment test added.
3.RPINT ONLY option added.
4.Fixes for BP1700P.

Rev 1.003t
1.Improved alignment test.

Rev 1.003v
1.BP1700 audio verification problem solved.

Rev 1.003x
1.New firmware for BP5 (mh36) addresses pop in the lead-out issue.

Rev 1.004u

1.Buf fix:
	#9 key scanning drives displays Device 1 [SCSI (1,1)].  Should not say SCSI, it's Firewire. 
2.Buf fix:
	Printer option does not appear in a DVD QuadraPRO under the #2 key.  I doesn't scroll over to the Printer option.
3. Bug fix:
	Printer Select needs a reboot to initialize the printer.  If I select the Sig IV and then go to the printer alignment utility it does not open the drawer to receive the disc.
4. Bug fix:
	With the Printer Alignment utility if it fails to pick a CD from the first spindle it will try from the others and whichever spindle it finds a CD on it will default to that spindle for all subsequent alignment attempts.  Exiting the utility does not "correct" this so you must reboot to get it to pick a CD from the first spindle. 
5. Bug fix:
	No "Drives Not Present" error message when no drives are attached.
6. Bug fix:
	Tower printing does not work. 
7. Bug fix:
	Setting drive order does is not applied until unit is rebooted. 
8.Bug fix:
	With the printer alignment utility if there are no CD's in the inputs the machine reports back and Unload error instead of Input Empty.  If you hit Yes to the prompt it reports back an Unload Error again.  
	
Rev 1.004v
1.ROM drives are queried for 1.prn even if Floppy drive is installed (printing).

Rev 1.005b
1.Client support.
2.CD-1E and CD-4A DVD-5A card supported,.

Rev 1.005c
1.Fix for INPUT SPINDLE EMPTY  condition in QUADRA PRO loaders.

Rev 1.005e
1.Support for more than 4 multiple images.
2.Loop mode bug fixed in 5908.
3.Fix client (missing image comdition).
4.Image selection bug fixed.

Rev 1.005f
1.NO DRIVES FOUND message.
2.Fix for Serial version of display board.
3.Medium niot blank reporting bug fixed.

Rev 1.005g
1.Drive order setting support added for PIONEER drives.
2.Image selection fix in multiple image mode.

Rev 1.005i
1.DVD fix(open session).

Rev 1.005p
1.Changes for supporting ISC files in network client.

Rev 1.005s
1. Change in recording DVD-R masters made by PANASONIC machine(now everything is written DAO mode).

Rev 1.005t
1.Rev string changed to XPSA.
2.New firmware for bp1700 (mf00) with more media support:
SONY,SKC T2,Fuji T2,RiTEK JS 74 T2Code,RiTEK JS 80 T2Code,PRODISC.
.
Rev 1.005u ( never released out of Formats.)

Rev 1.005w
1.Suppoprt for 48X Plextor drive added.

Rev 1.005x
1.Automatic firmware update for 4824A Plextordrive.

Rev 1.005z
1.Bug in diplay fixed (introduced in 1.005x)
2.Support for PRISM printer added again.

Rev 1.006a
1.Fix for SaClient (remopte status problem).
2.Support for IDE version of keypad/diaplay interface cards added.

Rev 1.006c
1.Attempt fo fix Spectrum2 (large PRN files) problem.


Rev 1.006d
1.New firmware for BP1700 (mg00).

Rev 1.006f
1.Change in loading printer routine (eliminated extra G command for QuadraPro).

Rev 1.006g
1. J command in printer alignment.

Rev 1.006h
1.PRN bug in SaClient fixed.
2.Eliminated delay when recording when not all drives are loaded with blanks.

Rev 1.006j
1.Drive not ready bug fixed ( introduced in 1.006h - affects all Sanyo drives)
2."Set Drive Order" bug fixed.
3.Printer aligbnment bug fixed.

Rev 1.006k
1.Rimage coloring printing bug fixed.
2.Bunproof fix for 48X Plextor.
3.New firmware for BP1700(mh00).

Rev 1.006l
1.Fix for BP5 recording (introduced in 1.006h)
2.Color print big fixed (when using Rimage printer).

Rev 1.006m
1.Setting the drive in 48X Plextor configuration.

Rev 1.006n
1.Bug in BP1700P firmware upgrade fixed.

Rev 1.006o
1.Drive Ready Procedure improved for PIONEER drives( afftects all towers
  when at least drive is empty).
2.XA format fix for A04 and A05 drives.


Rev 1.006p
1.Drive not Ready bug fixed (affects all towers).

Rev 1.006s
1.Change is speed setting routine.

Rev 1.006t
1.Bug in watermark drive selection fixed.

Rev 1.006u
1.Client display bugs fixed.

Rev 1.006w
1.Not released.

Rev 1.006u(3/18/03)
1.Fix for lockup in towers (it could more occur more often in compare mode tha copy becuase).
2.New network prototol rev and new SaClient.
3.SaClient displays About dialog;

Rev 1.006x(3/18/03)

Rev 1.006y - sounds too funny

Rev 1.006z(3/21/03)
1.Change in handling loader firmware rev( "370" is searched otherwise the software works in Tibi's mode)..
2.Tab order in SaClient.exe application changed and spelling errors corrected.

Rev 1.007a(3/24/03)
1.New firmware for Plextor 48X writer(2.04).

Rev 1.007b(3/28/03)
1.Removed remaining time info.
2.Delay introduced for BP5 in tower async mode.

Rev 1.007c(3/31/03)
1.Changes in verification routines.

Rev 1.007d(3/31/03)
1.Cache change reverted back to prior 1.006u

Rev 1.007e(4/3/03)
1.Support for IDE keypad interface improved.

Rev 1.007f(4/10/03)
1.Import PRN form ROM drive bug fixed.
2.BP5 firmware load bug fixed.
3.DRive not reday not counted as bad copy in the system counters.
4.No need for WNASPI32.DLL.

Rev 1.007g(4/15/03)
1.Fix for A05 audio problem.
2.Another fix for DKI card.

Rev 1.007i(4/29/03)
1.Fix for lockup in cache.

Rev 1.007j(5/19/03)
1.Fix for importing PRN file by tower systems.


Rev 1.007k(5/21/03)
1.Synchonizing changes for diplay interface(affects SaClient 'ENTER QUANTITY:").
2.PRINT/ISC bug fixed in SaClient.
3.Audio ISC bug fixed in SaClient.
4.New firmware 2z04 for 48X Plextor.
5.Cache bug fixed (affected COPY + VERIFY) function in towers.


Rev 1.007n(6/26/03)
1.DVD bug fixed.

Rev 1.007p(6/30/03)
1.Print in relay mode bug fixed.
2.New firmware for 48X SmartDrive.

Rev 1.007r(7/03/03)
1.WIN98 bug fixed,
2."Percent progress" on XP Platform fixed.
3.Better appearance of SaClient in 640x480 resolution.


Rev 1.007s(07/14/03)
1.Key # 4 in towers PRINT error handling improved.
2.Relay mode bug in relay mode fixed.

Rev 1.007t(07/16/03)
1.PRINT ONLY bugs fixed.

Rev 1.007u(07/21/03)
1.Lockup when printer not connected to the tower with DKI card (key #4) 

Rev 1.008a(07/22/03)
1.Support for A06 added.
2.SaClient bug fixed when connected to DKI server.

Rev 1.008b(07/23/03)
1.Fix for DKI/SaClient progress bar bug.


Rev 2.001a (08/06/03)